view style:

View: 50 100 ALL

  • 45° Fibre Optic Corner Block

    View Details

    Power pole mounted, this corner block provides a 470mm radius around an inside or outside corner at angles up to 45°. 45° Fibre Corner Block are available in Australia, New Zealand and worldwide.

  • 90° Corner Block

    View Details

    Pole mounted, this corner block provides a 470mm radius for angles up to 90°. Application and roller specifications are the same as for the 45° blocks. 90° Corner Blocks are available in Australia, New Zealand and worldwide.

  • Alloy Cast Bellmouth

    View Details

    For protection of the lead-in point of the conduit, powder coated finish provides a less abrasive surface for cable entry when installing softer sheathed f/o cables. Hinged with clamp for safe fit into the conduit. Bellmouths are available in Australia, New Zealand and worldwide. *colours may vary

  • Aquagel AQG – Green

    View Details

    High Performance non-hazardous Lubricant Gel: Suitable for heavy power cable and roughly sheathed cable ( e.g. hessian, bitumen, etc.) This is a thixotropic* gel that enables hand application to cable. Aquagel AQG Green is available in Australia, New Zealand and worldwide. *The thixotropic gel contains a time-dependent shear thinning property, meaning it is thick under…

  • Aqualube G – Blue

    View Details

    Heavier grade non-hazardous cable lubricant: suitable for installing fibre optic cable, conduit pre-lubrication in concrete conduits, vertical pulls, old, rough or water-filled conduits. Excellently suited for large-sized cable during extra long distance pulls and hot weather environments. Aqualube G Blue is available in Australia, New Zealand and worldwide.

  • Bag Line Carrier

    View Details

    Shaped like a an open topped bag with tie off eyelets to ensure the balloon stays inflated. Bag Line Carriers are available in Australia, New Zealand and worldwide.

  • Balloon Line Carrier

    View Details

    Shaped like a balloon, with a rigid plastic mouth to ensure the balloon stays inflated. Balloon Line Carriers is available in Australia, New Zealand and worldwide.

  • Bellmouth

    View Details

    For protection of the lead-in of the conduit. Galvanised sheet steel, hinged with clamp for safe fit into the conduit. Bellmouths are available in Australia, New Zealand and worldwide.

  • Bi Fold Manhole Guard

    View Details

    The Bi Fold Manhole Guard is a product designed to assist as a safety barrier around an open manhole. Bi Fold Manhole Guards are available in Australia, New Zealand and worldwide.

  • Cable Roller Guides

    View Details

    Cable Roller Guides are a multi-directional roller guide, with the top roller removable by way of a split pin and removable centre bar for ease of disembarking the cable. Cable Roller Guides are available in Australia, New Zealand and worldwide.

  • Cable Tray Roller converted from Cable Trench Roller for aerial positioning

    View Details

    Cable Tray Rollers are available in Australia, New Zealand and worldwide.

  • Cable Tray Rollers

    View Details

    Cable Tray Rollers are available in Australia, New Zealand and worldwide.

  • Clevis to Clevis Swivel

    View Details

    Swivels are used in the reduction of cable twist.  The swivels have been manufactured with sealed bearings and are precision machined from high grade steel. Clevis to Clevis Swivels are available in Australia, New Zealand and worldwide.

  • Closed Tubular Single Eye Grip

    View Details

    Closed Tubular Single Eye Grip is used for hauling of communication and power cable. To be used in underground conduits, trenches, cable trays and for service lines to factories. Closed Tubular Single Eye Grip is available in Australia, New Zealand and worldwide. CLP WIRE CABLE GRIPS ARE NOT DESIGNED FOR LIFTING

  • Conduit Cable Guiding Bends/Slippers

    View Details

    Cable Guiding Bends/Slippers are available in Australia, New Zealand and worldwide.  

  • Crank Handle

    View Details

    Cranks Handle connects on to end of 22mm hand rods to assist twisting the rods in a clockwise direction. Crank Handles are available in Australia, New Zealand and worldwide.

  • Cross Arm Ratchet Bracket

    View Details

    Versatile and easy to use, it has a hinged top flap allowing quick entrapment of the cable. Cross Arm Ratchet Brackets are available in Australia, New Zealand and worldwide.

  • D Shackles : 316 Stainless Steel

    View Details

    D Shackles are used for attaching grips to swivels. D Shackles 316 S/S – CSK Slotted Head. D Shackles are available in Australia, New Zealand and worldwide.

  • Double Overhead Roller

    View Details

    Double Overhead Rollers are available in Australia, New Zealand and worldwide.

  • Drawline Pressure Roping Gun

    View Details

    For hands free operation. Suitable for conduits ranging from 40mm to 200mm and roping grommets to accommodate rope from 4mm to 12mm. NOTE: CLP also produces line carriers and drawline – these items are not included with this product and should be ordered additionally. Drawling Pressure Roping Gun Kits are available in Australia, New Zealand…

  • Electric Blower 2 Stage

    View Details

    Featuring 2 motors and delivering 7 cubic metres of air at a safe low pressure, this unit will effectively blow a lightweight drawline up to 1000 metres of lubricated unoccupied conduit. Each motor will deliver approximately 3.5 cubic metres of air per minute. NOTE: CLP also manufactures line carriers, parachutes and drawline – these items…

  • Eye to Eye Swivel

    View Details

    These units are ideal for fibre pulling applications, due to their small size and 4.9 kN rating. The swivels have been manufactured with sealed bearings and are precision machined from high grade steel. They have been certified for a 2:1 safety factor.

  • Fibreglass & PVC Hand Rods

    View Details

    All hand rods are fitted with a male and female threaded coupling on each end, suitable for use with CLP rodding accessories. Fibreglass & PVC Hand Rods are available in Australia, New Zealand and worldwide.

  • Fibreglass Trace Rod

    View Details

    CLP’s range of fibreglass duct rod comes in four diameters - 4.5mm, 6mm & 9mm are all embedded with one 0.6mm copper trace wire and 11mm is embedded with two 0.6mm copper trace wires. CLP rod is available in Australia, New Zealand and worldwide.

  • Flat Trench Roller Guide

    View Details

    Flat Trench Roller Guides are available in Australia, New Zealand and worldwide.

  • Flexi Leaders “IMPROVED DESIGN”

    View Details

    Flexi Leaders are screwed onto the end of the rod to assist through tight bends. Available in Australia, New Zealand and worldwide.

  • Hand Held Mini Rodder (Donut)

    View Details

    Economic, hand held, lightweight and robust mini rodder for small projects. Triple stranded cable pulling device with a non-conducting coiled spring leader made from polyester wire. Hand Held Mini Rodder (Donut) is available in Australia, New Zealand and worldwide.

  • High Pressure Drawline Carrier

    View Details

    Only for use with compressed air in long runs or water-filled conduit. Ideally suited for pushing water ahead of itself. High Pressure Drawline Carriers are available in Australia, New Zealand and worldwide ** CLP tools are referenced by the unit diameter, always confirm the I.D. of the conduit to ensure a suitable fit.

  • Hinged Conduit Bends/Slippers

    View Details

    Hinged Cable Bends/Slippers are available in Australia, New Zealand and worldwide  

  • Hook ‘n’ Loop

    View Details

    By entering from opposite ends, the Hook ‘n’ Loop set makes coupling of two rod lengths easy. Hook 'n' Loop is available in Australia, New Zealand and worldwide.

  • HYDRAULIC HEAVY DUTY HANDYLIFT COVER LIFTER

    View Details

    Suits heavy duty pit lids. The Hydraulic Handylift makes light work of lifting heavy covers and is labour saving. Whether the covers are internal, block-paved, Gatic or split triangle, a kit can be provided to lift them quickly and safely, protecting operators from back & finger injury and removing all physical strain from the lifting process.…

  • Inner Duct Pulling Eyes

    View Details

    These rugged zinc-plated steel Inner Duct Swivel Pulling Eyes allow inner duct placement to become a faster, safer operation. They have been manufactured with sealed bearings and are precision machined from high grade steel.

  • Insulator Clamp Bracket

    View Details

    For use on top of insulators to assist with the placement of cable on top of post insulators. Easy to use, tension adjusted by turning, when finished move 90 degrees and the cable drops onto the insulator. Insulator Clamp Brackets are available in Australia, New Zealand and worldwide.

  • Lace Up Double Eye Grip

    View Details

    Designed to anchor cables in a vertical or sloping position.  Used to anchor in manholes where the longitudinal movement of the cable caused by road vibration needs to be checked. Lace Up Double Eye Grips are available in Australia, New Zealand and worldwide. CLP WIRE CABLE GRIPS ARE NOT DESIGNED FOR LIFTING

  • Long Handled Lifter

    View Details

    Suits heavy duty pit covers Class B & D. Long & Short Handled Lifters are available in Australia, New Zealand and worldwide.   * Colours may vary

  • Manhole “Econo Guard”

    View Details

    Manhole Guard is designed to assist as a safety barrier around an open manhole. This range is a lighter guage, economic alternative to the Telstra compliant range of manhole guards. Manhole Guards are available in Australia, New Zealand and worldwide.

  • Manhole Guard

    View Details

    Manhole Guard is designed to assist as a safety barrier around an open manhole. Manhole Guards are available in Australia, New Zealand and worldwide.

  • Manhole Guard Cover

    View Details

    For protection from the elements when working in manholes or pits. Manhole Guard Covers are available in Australia, New Zealand and worldwide. Manhole Guard Covers include: Waterproof material Double stitching Tie-down straps and cords Zip access Viewing window Carry bag Dimensions (metres): 1.4 x 1.4 x 1.2

  • Manhole Pivoting Roller Guide

    View Details

    Manhole Pivoting Roller Guide assists with the variation in cable tension, with the rollers pivoting on a single point. Manhole Pivoting Roller Guides are available Australia, New Zealand and worldwide.

  • Manhole Roller Guide

    View Details

    The Manhole Roller Guide can sit either on top of the manhole edge or inside the manhole for corner pulls. The guides are designed to assist in the laying of cable up to 150mm diameter when entering a manhole from ground level. Manhole Roller Guides are available in Australia, New Zealand and worldwide.

  • Manhole Twin Roller Guide

    View Details

    The Manhole Roller Guides sit on top of the manhole edge for corner pulls. The guides are designed to assist in the laying of cable up to 150mm diameter when entering a manhole from ground level. Manhole Roller Guides are available in Australia, New Zealand and worldwide.

  • Mini Harness

    View Details

    Mini Harness is used for pulling back more than one cable at a time. Mini Harness is available in Australia, New Zealand and worldwide.

  • Occupied Conduit Adaptor

    View Details

    The Occupied Conduit Adaptor is a well-built unit that provides a good seal on occupied conduit. Designed for 80-100mm conduit, suits 80-102mm I.D. Contact CLP for > 105mm I.D. NOTE: CLP also produces line carriers and drawline – these items are not included with this product and should be ordered additionally. Occupied Conduit Adaptors are…

  • Occupied Trench Roller Guides

    View Details

    The Raised Trench Roller Guide is useful for hauling cable within occupied trenches. The trench roller guide suits cables in the trench up to 1400mm in diameter. Raised Trench Roller Guide is available in Australia, New Zealand and worldwide.

  • Open Tubular Double Eye Grip

    View Details

    Allow the cable to pass through the middle of the grip. Open Tubular Double Eye Grips are available in Australia, New Zealand and worldwide. CLP WIRE CABLE GRIPS ARE NOT DESIGNED FOR LIFTING

  • Overhead Catenary Stringer Roller

    View Details

    For use with Fibre or Coaxial cable up to 25mm in diameter. Overhead Catenary Stringer Rollers are available in Australia, New Zealand and worldwide.

  • Pillar Box Spanner

    View Details

    Pillar box spanner is used to untighten pillar boxes. Spanner to suit 21mm x 26mm AF (1/2″ x 5/8″ BSW). Pillar Box Spanners are available in Australia, New Zealand and worldwide.

  • Pit Cover Seal Breaker

    View Details

    Pit Cover Seal Breakers are available in Australia, New Zealand and worldwide.

  • Pit Key

    View Details

    Suits pit covers P1-P5, Pit Keys are available in Australia, New Zealand and worldwide.

  • Plumett Equipment

    View Details

    CLP has been the Australian, New Zealand and South Pacific agent for Plumettaz S.A. since 1996. Plumett cable jetting machines have been designed for blowing or floating telecommunication and data transmission cables (optical fibre, coax or multipair) in preinstalled ducts.