Fibreglass Trace Rod

CLP’s range of fibreglass duct rod comes in four diameters – 4.5mm, 6mm & 9mm are all embedded with one 0.6mm copper trace wire and 11mm is embedded with two 0.6mm copper trace wires.
CLP rod is available in Australia, New Zealand and worldwide.

Description

Dispenser OD (mm) Conduit Size (mm) 60m 80m 100m 120/125m 150m 200m 250m 300m 350m 400m Thread
TDUS-4.5 4.5 up to 50 4.5060 4.5080 4.5100 - - - - - - - [M5]
TDUS-6 6 50-80 6060 6080 6100 6120 6150 6200 - - - - [M6]
TDUS-9 9 80-100 - - 9100 9125 9150 9200 9250 - - - [M6]
TDUS-11 11 100-150 - - 11100 11125 11150 11200 11250 11300 11350 11400 [M8]

CLP’s range of fibreglass duct rodders  is manufactured from pultruded fibreglass strands jacketed with a tough polypropylene coating to give a unique combination of strength and durability.

The rod is supplied complete with brass male threaded ends, screw on bullet pulling eye and fitted to a sturdy zinc plated steel frame with transport locking brake.

The brake is not a speed regulator.  Speed and momentum is manually regulated by the operator’s pushing/pulling momentum at the pit, backed up by the ‘lookout’ standing by the frame.

CLP’s range of fibreglass duct rod comes in four diameters – 4.5mm, 6mm & 9mm are all embedded with one 0.6mm copper trace wire and 11mm is embedded with two 0.6mm copper trace wires.


CLP Code Description
TDUS-4.5060 4.5mm x 60m rod
TDUS-4.5080 4.5mm x 80m rod
TDUS-4.5100 4.5mm x 100m rod
TDUS-6060 6mm x 60m rod
TDUS-6080 6mm x 80m rod
TDUS-6100 6mm x 100m rod
TDUS-6120 6mm x 120m rod
TDUS-6200 6mm x 200m rod
TDUS-9100 9mm x 100m rod
TDUS-9125 9mm x 125m rod
TDUS-9150 9mm x 150m rod
TDUS-9200 9mm x 200m rod
TDUS-11100 11mm x 100m rod
TDUS-11125 11mm x 125m rod
TDUS-11150 11mm x 150m rod
TDUS-11200 11mm x 200m rod
TDUS-11250 11mm x 250m rod
TDUS-11300 11mm x 300m rod
TDUS-11350 11mm x 350m rod
TDUS-11400 11mm x 400m rod