Shop | Page 2 | Cable Laying Products

view style:

View: 50 100 ALL

Pole Bracket

View Details

The Pole Bracket is used to mount Aerial Corner Blocks (ACB) to poles in either the horizontal or vertical position. Heavy duty strap and ratchet are used to retain the pole bracket to the pole. (sold separately: RATSTRP-50) Pole Brackets are available in Australia, New Zealand and worldwide.
Poly Drawline

View Details

Manufactured from natural polypropylene in light and heavy gauge. Poly Drawline is available in Australia, New Zealand and worldwide.
Proving Mandrel

View Details

Mandrels suitable for proving duct integrity. Special sizes can be quoted on request. Proving Mandrels are available in Australia, New Zealand and worldwide. ** CLP tools are referenced by the unit diameter, always confirm the I.D. of the conduit to ensure a suitable fit.
RACESPEC HAULING ROPE

View Details

Racespec / Spectra Rope is available in Australia, New Zealand and worldwide.
Ratchet Strap

View Details

Used in conjunction with RPB-Pole Bracket to wrap around posts and fix in place. Ratchet Straps are available in Australia, New Zealand and worldwide.
Refill Coil

View Details

Refill rolls of rod are available in standard lengths.
Removable Pulling Eyes

View Details

Removable pulling eyes are screwed directly to the end of the rod and used to pull drawling rope through conduit. Removable pulling eyes are available in Australia, New Zealand and worldwide.
Removable Tapered Knob

View Details

Removable tapered knobs are screwed on to the rod to assist the pushing of rodder through conduit. Removable tapered knobs are available in Australia, New Zealand and worldwide.
Replacement ‘Dog Bone’ Rollers

View Details

Replacement rollers for underground and aerial equipment - fitted with sealed bearings. Replacement rollers are available in Australia, New Zealand and worldwide.
Rod Dispenser Units – Cage & Stand Only

View Details

In the event of damage, dispenser units for CLP rod can be purchased separately. Refill rolls of rod (TRF) are also available separately here. Rod Dispenser Units have a hand operated break for safety and ease of use. Rod Dispenser Units are available in Australia, New Zealand and worldwide.
Rodder Repair Fittings

View Details

Using 2 part epoxy resin, repair fittings are glued onto continuous fibreglass rodders. Male thread ends and joiners are available in Australia and New Zealand.
Rubber Conduit Cleaner

View Details

Suitable for cleaning conduit of sand, mud and other debris. Rubber Conduit Cleaners are available in Australia, New Zealand and worldwide ** CLP tools are referenced by the unit diameter, always confirm the I.D. of the conduit to ensure a suitable fit.
Short Rubber Slug

View Details

Proving duct integrity, cleaning sand, mud & spreading lubricant, especially on tight radius bends. Short Rubber Slugs are available in Australia, New Zealand and worldwide ** CLP tools are referenced by the unit diameter, always confirm the I.D. of the conduit to ensure a suitable fit.
Single Cable Blocks

View Details

Single Cable Blocks are available in Australia, New Zealand and worldwide.
Split Lock Quad Roller Conduit Guide

View Details

Split Lock Quad Roller Guide is installed on the outward conduit to protect and improve the flow of cable. Split Lock Quad Roller Guides are available in Australia, New Zealand and worldwide ** CLP tools are referenced by the unit diameter, always confirm the I.D. of the conduit to ensure a suitable fit.
Split Lock Roller Conduit Guide

View Details

Split Lock Roller Guides are available in Australia, New Zealand and worldwide.
Standby Field Kit

View Details

Standby, emergency field kit to repair broken rod ends and breaks to minimise down time out in the field. Consists of 2 male couplings, 2 joiners, 2 removable eyes, 2 glue sachets and emery. Universal Joining Kits are available in Australia, New Zealand and worldwide.
Swivel : 316 Stainless Steel – Eye to Eye

View Details

Suitable for directly attaching to rope. Stainless Steel Swivels are available in Australia, New Zealand and worldwide.
Trench Corner Rollers

View Details

The Trench Corner Rollers are a corner roller that can be used either separately or linked together to form the desired curve, or they can be used facing each other "U" shaped but inline to capture the cable in a straight line. Linking the Trench Corner Rollers together shares the load so they can accommodate…
Triple Shuttle Line Carrier

View Details

Suitable for high speed line blowing through long distances of unoccupied conduit. The carrier will operate in out of round duct or over minor obstruction. Triple Shuttle Line Carriers are available in Australia, New Zealand and worldwide.
Tubular Offset Eye Grip

View Details

Used for pulling slack during final placement of cable in exchange buildings and at termination points such as pole tops where the end of the cable cannot be used to haul from. Open Tubular Offset Eye Grips are available in Australia, New Zealand and worldwide. CLP WIRE CABLE GRIPS ARE NOT DESIGNED FOR LIFTING
Wire Brush Mandrel

View Details

Steel bristles for cleaning conduit of sand, rocks, grit and other light obstructions. Wire Brush Mandrels are available in Australia, New Zealand and worldwide. ** CLP tools are referenced by the unit diameter, always confirm the I.D. of the conduit to ensure a suitable fit.
Wire Cable Bridle

View Details

From 2 to 4 slings in staggered lengths with clevis ends. These are fitted to a single hauling ring for multiple cable or subduct hauling.
Drum Ramp Rollers DRR-1000-D

View Details

Drum Ramp Rollers are available in Australia, New Zealand and worldwide.
Manual Scissor Lift

View Details

The CLP Scissor Lift has been specifically designed to provide a light weight, highly portable piece of equipment to handle mid size drums of cable and optical fibre. *Colours may vary Manual scissor lift is available in Australia, New Zealand and worldwide.
Hydraulic Drum Jack 8T in top position; 4T in lower position

View Details

IMPROVED DESIGN : complete with stabilising bar to keep the unit square and stable 4/8T manually operated jack stands allow for the differing sizes of drums up to a flange diameter of 3 metres and a width of 2 metres. The hydraulic drum jack conveniently folds down for storage and transport. Hydraulic Drum Jacks are…
A-FRAME CABLE DRUM STAND – 120kg WLL

View Details

AFDS-120 A-Frame Cable Roller Stand WLL 120kg Often referred to as "the NBN drum roller", designed to hold multiple rolls of cable up to 1000mm dia. Available in Australia, New Zealand and worldwide.
COMPACT CABLE DRUM ROLLERS – 350mm & 650mm WIDE

View Details

Available in regular and heavy gauge steel. Often referred to as "the NBN box roller", designed to hold a single or multiple reels. Available in Australia, New Zealand and worldwide.
SUBDUCT COILER

View Details

Available in Australia, New Zealand and worldwide.
CAPSTAN WINCH – ELECTRIC : CLP-48723546

View Details

Designed to tackle the toughest pulling applications, CLP-48723546 Electric Capstan Winches are available in Australia, New Zealand and worldwide. Comeup Winch
CAPSTAN WINCH – PETROL : CLP-48723542

View Details

Portable capstan winch will pull 9.8kN / 1 Tonne, CLP-48723542 Petrol driven Capstan Winches are available in Australia, New Zealand and worldwide. Comeup Winch
Drum Caddy CLP-48723555

View Details

Drum Caddy is designed to securely hold small drums of cable. Drum Caddies are available in Australia, New Zealand and worldwide.
TRAILER MOUNTED CAPSTAN WINCH – ELECTRIC

View Details

The PLUMETT capstan E-Winch is the first all-electric compact and lightweight capstan winch with impressive strong noise reduction and emission-free motor. The E-Winch is available in Australia, New Zealand and worldwide. Comeup Winch