The Bi Fold Manhole Guard is a product designed to assist as a safety barrier around an open manhole. Bi Fold Manhole Guards are available in Australia, New Zealand and worldwide.
Featuring 2 motors and delivering 7 cubic metres of air at a safe low pressure, this unit will effectively blow a lightweight drawline up to 1000 metres of lubricated unoccupied conduit. Each motor will deliver approximately 3.5 cubic metres of air per minute. NOTE: CLP also manufactures line carriers, parachutes and drawline – these items…
High Performance non-hazardous Lubricant Gel: Suitable for heavy power cable and roughly sheathed cable ( e.g. hessian, bitumen, etc.) This is a thixotropic* gel that enables hand application to cable. Aquagel AQG Green is available in Australia, New Zealand and worldwide. *The thixotropic gel contains a time-dependent shear thinning property, meaning it is thick under…
The Occupied Conduit Adaptor is a well-built unit that provides a good seal on occupied conduit. Designed for 80-100mm conduit, suits 80-102mm I.D. Contact CLP for > 105mm I.D. NOTE: CLP also produces line carriers and drawline – these items are not included with this product and should be ordered additionally. Occupied Conduit Adaptors are…
For protection of the lead-in of the conduit. Galvanised sheet steel, hinged with clamp for safe fit into the conduit. Bellmouths are available in Australia, New Zealand and worldwide.
For protection of the lead-in point of the conduit, powder coated finish provides a less abrasive surface for cable entry when installing softer sheathed f/o cables. Hinged with clamp for safe fit into the conduit. Bellmouths are available in Australia, New Zealand and worldwide. *colours may vary
Split Lock Quad Roller Guide is installed on the outward conduit to protect and improve the flow of cable. Split Lock Quad Roller Guides are available in Australia, New Zealand and worldwide ** CLP tools are referenced by the unit diameter, always confirm the I.D. of the conduit to ensure a suitable fit.
Pole mounted, this corner block provides a 470mm radius for angles up to 90°. Application and roller specifications are the same as for the 45° blocks. 90° Corner Blocks are available in Australia, New Zealand and worldwide.
By entering from opposite ends, the Hook ‘n’ Loop set makes coupling of two rod lengths easy. Hook 'n' Loop is available in Australia, New Zealand and worldwide.